Depot Repair Service

Medical Incubator & Auto-Reader Repair

Expert depot repair for CO2 incubators, biological incubators, and automatic biological indicator readers. Free evaluation, 90-day warranty.

ISO 9001 · 14001 · 45001 SDVOSB Veteran-Owned Written Quote First Field & Nationwide Depot

Models We Service

We repair all models listed below. Contact us for models not listed — we service many additional variants.

Thermo Scientific HeraCell 150i

CO2 incubator with 150L capacity, infrared CO2 sensor, and 180C decontamination cycle.

Thermo Scientific Forma Series II 3110

Water-jacketed CO2 incubator with HEPA filtration and RH humidity control.

Thermo Scientific Heracell VIOS 160i

High-capacity CO2 incubator with O2 control and rapid humidity recovery.

Eppendorf Galaxy 170R

CO2 incubator with direct heat and CO2 control, 170L capacity, and decontamination cycle.

Eppendorf Galaxy 14S

Compact 14L CO2 incubator for small-scale cell culture and incubation.

Panasonic / Sanyo MCO-18AIC

CO2 incubator with ULPA filter and decontamination by H2O2 fumigation.

Binder CB 53

CO2 incubator with direct heat and gas-proof inner chamber for sensitive cell culture.

Binder CB 150

Larger-capacity CO2 incubator with high-grade stainless inner chamber.

NuAire NU-4500

CO2 incubator with split inner door and HEPA filtration for clean cell culture environment.

Memmert IN 55 Plus

Gravity convection incubator for microbiology, biochemistry, and pharmaceutical incubation.

3M Attest 490

Biological indicator auto-reader for steam sterilization monitoring — optical and electronic repair.

3M Attest 390

Rapid readout biological indicator reader for 3M Attest BIs with 3-hour readout.

Raven Biological Indicator Reader

Fluorescence-based BI reader for EO, steam, and hydrogen peroxide sterilization monitoring.

Mesa Labs SureCycle

Biological indicator incubation system for steam sterilization verification.

A Biomedical Service repairs CO2 incubators, water-jacketed incubators, biological indicator auto-readers, and laboratory ovens for hospitals, clinical labs, and research facilities.

How Depot Repair Works

Four simple steps from broken to back in service.

1

Ship Your Device

Pack and ship to our Fresno, CA facility. We provide packaging guidance on request. Prepaid shipping labels available for qualifying repairs.

2

Free Evaluation & Quote

We diagnose the fault and deliver a written repair quote within 24 hours. No charge if you decline — we return the device at no cost.

3

Expert Repair

Approve the quote and our certified technicians repair to OEM specification using quality parts. Most repairs completed in 5–10 business days.

4

Tested & Returned

Full functional and safety testing before shipping back with a complete service report and 90-day repair warranty.

What We Repair

Common incubator and auto-reader faults our technicians service.

Temperature Control Repair

Temperature instability, overshoot, and underheating. Thermostat replacement, heating element repair, and temperature calibration.

CO2 Sensor & Control

CO2 concentration drift and CO2 controller failures. Infrared CO2 sensor replacement and CO2 calibration.

Humidity System

Humidity pan, humidification system, and evaporator repair for water-jacketed incubators.

Door Seal & Gasket

Door seal replacement and hinge adjustment to maintain stable incubation environment.

Auto-Reader Optical System

Fluorescence detection failures and optical system repair for biological indicator auto-readers (3M Attest, Raven).

Calibration & Mapping

Temperature mapping and CO2 calibration with documentation suitable for validation and accreditation.

Brands We Service

We repair CO2 incubators, biological incubators, and auto-readers from all major manufacturers.

Thermo Fisher Scientific (FormaHeracell)Eppendorf (New Brunswick)BinderMemmertNuAirePanasonic (Sanyo)3M AttestRavenMesa Labs

Why Choose A Biomedical Service

Free Evaluation

No charge to evaluate your device. Written quote provided before any work begins — you decide whether to proceed.

90-Day Warranty

All repairs backed by a 90-day parts and labor warranty. If the same fault returns, we fix it at no charge.

Certified Technicians

ISO 9001, 14001, and 45001 certified facility. Veteran-owned (SDVOSB). Every repair is fully documented for your compliance records.

Fast Turnaround

Typical depot repair completed in 5–10 business days from receipt. Rush service available on request for critical equipment.

Nationwide Shipping

Based in Fresno, CA. We accept ship-in repairs from healthcare facilities across all 50 states. Packaging guidance provided on request.

Service Documentation

Complete service reports provided with every repair — suitable for accreditation, biomed records, and compliance audits.

Incubator Repair FAQ

Do you repair CO2 incubators?
Yes. We repair CO2 incubators including CO2 sensor replacement, temperature calibration, and decontamination cycle documentation.
Do you repair biological indicator auto-readers?
Yes. We repair 3M Attest and Raven biological indicator auto-readers including optical system and fluorescence detector repair.
Do you perform temperature mapping?
Yes. Temperature mapping services are available for incubators with documentation suitable for GMP validation.
How long does incubator repair take?
Most incubator repairs are completed in 5–10 business days. Temperature calibration is typically completed in 3–5 days.
Do you provide calibration certificates?
Yes. Temperature and CO2 calibration certificates with NIST traceability are provided.

A Biomedical Service is certified to ISO 9001:2015, ISO 14001:2015, and ISO 45001:2018.

Get Started Today

Ship Your Incubator In for Repair

Free evaluation, written quote, calibration documentation, 90-day warranty.

Request a Repair Quote
+1-800-910-1422
 Free evaluation
 90-day warranty
 Written quote first
 Nationwide depot