Depot Repair Service

Autoclave & Sterilizer Repair — Back in Service Fast

Expert depot repair for tabletop and floor-standing autoclaves and sterilizers. All major brands. Free evaluation, written quote, 90-day warranty.

ISO 9001 · 14001 · 45001 SDVOSB Veteran-Owned Written Quote First Field & Nationwide Depot

Models We Service

We repair all models listed below. Contact us for models not listed — we service many additional variants.

Midmark M9

Popular tabletop steam autoclave for dental and medical offices — door gasket, heating element, and vacuum pump repair.

Midmark M11

Larger-capacity tabletop autoclave with gravity and vacuum cycles for wrapped and unwrapped instrument loads.

Tuttnauer 2340M/2540M

Manual tabletop autoclaves widely used in dental, podiatry, and medical offices.

Tuttnauer 3870/3850

Larger-capacity manual and automatic autoclaves for higher-volume sterilization needs.

Tuttnauer Valueklave 1730

Entry-level tabletop autoclave for small practices with gravity and liquid cycles.

Scican Statim 2000

Cassette autoclave with 9-minute wrapped instrument cycle — door seal, cassette, and pump repair.

Scican Statim 5000

Large-cassette autoclave for higher-volume instrument loads with rapid cycle capability.

Scican BRAVO 17V

Tabletop pre-vacuum autoclave with 17L chamber for wrapped and unwrapped loads.

Pelton & Crane OCM

Classic tabletop dental autoclave with gravity cycle — widely serviced legacy unit.

Pelton & Crane Magnaclave

Larger-capacity tabletop autoclave for medium-volume dental and medical sterilization.

Prestige Medical 1730

Compact tabletop autoclave for small practices and veterinary clinics.

Amsco Eagle 3000 (Steris)

Floor-standing pre-vacuum sterilizer for hospital SPD and central sterile departments.

Getinge HS33/GSS67

Floor-standing hospital autoclaves for central sterile processing departments.

A Biomedical Service repairs autoclaves and sterilizers for dental offices, hospitals, surgery centers, and laboratories. A malfunctioning sterilizer halts clinical operations — our technicians diagnose and repair faults quickly to get your sterilization cycle running again.

How Depot Repair Works

Four simple steps from broken to back in service.

1

Ship Your Device

Pack and ship to our Fresno, CA facility. We provide packaging guidance on request. Prepaid shipping labels available for qualifying repairs.

2

Free Evaluation & Quote

We diagnose the fault and deliver a written repair quote within 24 hours. No charge if you decline — we return the device at no cost.

3

Expert Repair

Approve the quote and our certified technicians repair to OEM specification using quality parts. Most repairs completed in 5–10 business days.

4

Tested & Returned

Full functional and safety testing before shipping back with a complete service report and 90-day repair warranty.

What We Repair

Common autoclave and sterilizer faults we service.

Door Gasket & Seal Replacement

Steam leaks, door won't seal, or failed door interlock. Gasket replacement and door mechanism service.

Heating Element Replacement

Won't reach temperature or slow heat-up. Heating element testing and replacement.

Pressure & Vacuum System

Failed vacuum cycles, pressure faults, and pressure transducer errors. Vacuum pump service and pressure system repair.

Control Board Repair

Cycle abort errors, display faults, and non-responsive controls. Control board diagnosis and repair.

Solenoid Valve Service

Water fill, steam, and exhaust solenoid valve failures causing cycle errors.

Biological Indicator Verification

Post-repair cycle validation and biological indicator testing to verify sterilization efficacy.

Autoclave Brands We Service

We service tabletop and floor-standing autoclaves and sterilizers from all major manufacturers.

MidmarkTuttnauerPelton & CraneScicanStatimPrestige MedicalRitterBarnsteadAmsco (Steris)Getinge

Why Choose A Biomedical Service

Free Evaluation

No charge to evaluate your device. Written quote provided before any work begins — you decide whether to proceed.

90-Day Warranty

All repairs backed by a 90-day parts and labor warranty. If the same fault returns, we fix it at no charge.

Certified Technicians

ISO 9001, 14001, and 45001 certified facility. Veteran-owned (SDVOSB). Every repair is fully documented for your compliance records.

Fast Turnaround

Typical depot repair completed in 5–10 business days from receipt. Rush service available on request for critical equipment.

Nationwide Shipping

Based in Fresno, CA. We accept ship-in repairs from healthcare facilities across all 50 states. Packaging guidance provided on request.

Service Documentation

Complete service reports provided with every repair — suitable for accreditation, biomed records, and compliance audits.

Autoclave Repair FAQ

What autoclave types do you repair?
Tabletop steam autoclaves, flash sterilizers, cassette-type sterilizers (Statim), and floor-standing units for hospitals and labs.
How long does autoclave repair take?
Most autoclave repairs are completed in 5–7 business days from receipt. Door gaskets and heating elements are typically same-day repairs.
Do you provide cycle documentation after repair?
Yes. We run validation cycles after repair and provide documentation suitable for your infection control and compliance records.
Can you repair dental office autoclaves?
Yes. Dental autoclaves (Midmark M9/M11, Tuttnauer, Pelton & Crane, Scican Statim) are among our most common repairs.
What if my autoclave model is discontinued?
We repair many discontinued autoclave models. Contact us with your make and model — we likely have parts and service history.

A Biomedical Service is certified to ISO 9001:2015, ISO 14001:2015, and ISO 45001:2018.

Get Started Today

Autoclave Down? Ship It In.

Free evaluation, written quote, 5–7 business day turnaround. 90-day warranty on all sterilizer repairs.

Request a Repair Quote
+1-800-910-1422
 Free evaluation
 90-day warranty
 Written quote first
 Nationwide depot