The Physio-Control LifePak 20e defibrillator/monitor is really two powerful units in one. AED Mode offers early intervention features perfect for a crash cart or first responder unit. The "closed door" system makes for a highly intuitive design that gives BLS users only those features they're trained to provide.
Manual Mode literally opens the door to a host of advanced lifesaving features with the simple push of a latch. ALS users gain access to noninvasive pacing, ECG monitoring (3- and 5-wire), synchronized cardioversion, and MASIMO SET® pulse oximetry.
The Physio-Control LifePak 20e gives you a full energy charge of up to 360 J, the highest in the industry. With this unit, you get an easy to use, super-effective device that combines an intuitive interface with sophisticated features that make the difference when seconds count.
- Transmit 12-lead ECGs from the field to improve patient outcomes
- LIFENET® STEMI Management offers seamless, secure ECG data exchange between prehospital, ED, & PCI centers
- CODE-STAT™ 7.0 Data Review Software with Advanced CPR Analytics annotates chest compressions onto ECG reports for AHA compliance
- DT EXPRESS™ data transfer software runs on Windows & lets you add critical event/waveform data to PCs
- Generously sized screen makes it easy to scan clutter-free waveforms and monitoring data
- AED/Manual Mode
- Microstream® capnography technology and FilterLine® accessories for EtC02 monitoring in both intubated and nonintubated patients.
- MASIMO SET® pulse oximetry provides accurate and stable O2 saturation monitoring
- ST monitoring feature alerts you to changes in patient’s ST measurement
Why choose A Biomedical Service as your Refurbishing Partner?
Beyond significant cost savings and a sound capital equipment investment strategy, A Biomedical Service believes your patients and medical staff deserve access to the highest quality, most reliable medical equipment. We're committed to delivering the level of excellence your facility needs to achieve its patient care and asset management goals.
We aren't simply your refurbishment company, we're your partners in managing capital equipment investment along every step of a piece of equipment's lifecycle.
Refurbished Equipment vs. Certified Used
What's the difference between a piece of used medical equipment that's been refurbished compared to one that's certified used?
Refurbished equipment and certified used equipment are both thoroughly cleaned and sterilized. Their sensitive data is properly disposed of and we make sure the equipment works the way the original manufacturer intended it to perform.
Refurbished Medical Equipment
A machine that's Refurbished goes through a rigorous process that takes each piece of equipment back to the original OEM specifications. Our in-house biomedical engineers are certified, experienced, and the best in the business.
Every item that needs to be restored is torn down to its component blocks, fully tested, and visually inspected. Using OEM parts, highly-trained Biomed engineers identify and replace components that have failed or are likely to fail. Think of it as a tuneup for used medical equipment.
If there's any damage to the case, it will be repainted or replaced. After reassembly, every unit is tested to make sure it meets stringent manufacturer requirements.
Certified Used Medical Equipment
Certified Used machines are also cleaned and sterilized. Their sensitive data is secured and legally disposed of. Our talented BMETs perform a series of thorough preventative maintenance procedures and test the units to make sure they meet OEM standards for operation. In this case, not all replacement parts may be OEM, however, the units will still reliably perform to original manufacturer specifications.
Need to sell your old medical equipment?A Biomedical Service is always looking to buy used or pre-owned medical equipment. We have a friendly, experienced purchasing department that would love to help walk you through the asset disposal process.
Our goal is to make the asset end-of-lifecycle process as painless as possible, get you the best price for your equipment, and help you dispose of unwanted medical equipment in an ecologically responsible way.
If you're interested in selling your used medical equipment to A Biomedical Service, contact us here or give us a call at +1-800-910-1422, Monday through Saturday, 8 AM - 6 PM PDT. We look forward to talking to you!
Refurbished & Used Certified with a Limited 1 year warranty
- Height: 8.4 in (21.3 cm)
- Width: 10.3 in (26.2 cm)
- Depth: 10.3 in (26.2 cm)
- Weight: 12.3 lbs (5.58 kg)
- AED with Shock Advisory System (SAS): Provides a normal operating capability for BLS users. All user features are available except manual defibrillation, synchronized cardioversion, pacing, and access to archived patient records. Provides shock energy defaults up to 360J. User selectable option to display ECG waveforms and/or visual AED prompts.
- Manual Mode: Provides a normal operating capability for ALS users. Allows access to manual mode energy selections up to 360J, synchronized cardioversion and pacing. ECG waveform is displayed.
- Setup Mode: Allows user to customize device for specific use
- Service Mode: Allows user to perform device diagnostic tests and calibrations, to display device module software and hardware versions, and to display and print the diagnostic code log
- Inservice Mode: Provides simulated waveforms for training and demonstration purposes. Waveforms consist of short segments of realistic data, which are repeated to create a continuous waveform.
- Archive Mode: Provides user the opportunity to access records of previous patients for review, transmission, printing, editing, or deletion.
- Auto Test Mode: Performs daily self-testing
- Waveform: Biphasic Truncated Exponential with voltage and duration compensation for patient impedance
- Energy Accuracy: +1 Joule or 10% of setting, whichever is greater, into 50 ohms; +15% of setting, whichever is greater, into any impedence from 25-100 ohms.
- Voltage Compensation: Active when disposable therapy electrodes are attached. Energy output within ± 5% or ± 1 joule, whichever is greater, of 50 ohm value, limited to the available energy which results in the delivery of 360 joules into 50 ohms.
- Paddle Options: QUIK-COMBO pacing/defigrillation/ECG electrodes are standard; Standard Adult Paddles are optional; Internal Handles with discharge control are optional; External Sterilizable Paddles are optional; Cable length is 2.4 m (8 ft) for QUIK-COMBO cables (not including electrode assembly)
- Energy Selection: 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 30, 50, 70, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, and 360 joules and user configurable sequence of 100–360, 100–360, 100–360 joules
- Charge Time: Typical charge time to 200 J is less than 5 seconds with fully charged battery; Charge time to 360 J is less than 7 seconds with fully charged battery; Charge time to 360 J is less than 10 seconds while not in low battery conditions
- Synchrononous Cardioversion: Energy transfer begins within 60ms of the QRS peak; Energy transfer begins within 25 ms of the External Sync Pulse; External Pulse: 0-5 V (TTL Level) Pulse, active High, >5 ms in duration, no closer than 200 ms apart and no further than 1 second apart
- Shock Advisory System (SAS): an ECG analysis system that advises the operator if the algorithm detects a shockable or non-shockable ECG rhythm. SAS acquires ECG via therapy electrodes only.
- The AED mode of the LIFEPAK 20e defibrillator/monitor is not intended for use on children less than 8 years of age.
- Shock Ready Time: Using a fully charged battery at normal room temperature, the device is ready to shock within 16 seconds if the initial rhythm finding is “Shock Advised”
- cprMAX™ technology Setup Options (items marked with * are default settings):
• Stacked Shocks: Off*, On
• Initial CPR: Off*, Analyze First, CPR First
• Preshock CPR:Off*, 15, 30 seconds
• Pulse Check: Never*, After Second No Shock Advised, After Every No Shock Advised, Always
• CPR Time 1 & 2: 15,30, 45, 60, 90, 120*, 180 seconds, 30 minutes
- Quick Set: Activates alarms for all parameters
- VF/VT Alarm: Activates continuous CPSS monitoring in Manual Mode
- Prints continuous strips of the displayed patient information
- Paper Size: 50 mm (2.0 in)
- Print Speed: Continuous ECG 25 mm/sec +/- 5% (measured in accordance with AAMI EC-11, 18.104.22.168)
- Delay: 8 seconds
- Autoprint: Waveform events print automatically; user configurable.
- Print Speed for CODE SUMMARY Reports: 25 mm/sec
- The device can easily print a CODE SUMMARY™ report, including an introduction with patient information and critical event record. The summary report also includes event and vital signs log, and waveforms associated with certain events. The device can print archived patient records and has two data communication ports—infrared (IrDA) and a direct serial port, which supports a serial data cable.
- Communications: This medical device is capable of transferring data records via IrDA version 1.0
- LCD: Liquid Crystal Display, 4.53" x 3.4" (11.52 cm x 5.94 cm)
- Resolution: 320 x 240 px color active LCD
- Waveform Display: Displays a minimum of 4 seconds of ECG and alphanumerics for values, device instructions or prompts. Has option to display one additional waveform.
- Waveform Display Sweep Speed: 25 mm/sec for ECG
- Prompts: Configurable voice and message prompts used for selected warnings and alarms.
- ECG can be monitored via 3-wire or 5-wire cables.
- Paddle/Electrode Options: Standard paddles or therapy electrodes (QUIK-COMBO pacing/defibrillation/ECG electrodes or FAST-PATCH® disposable defibrillation/ECG electrodes) are used for paddles lead monitoring. Compatible with LIFEPAK 12 ECG and therapy cables
- Lead Selection: Leads I, II and III, (3-wire ECG cable); Leads I, II, III, AVR, AVL, and AVF,V(c) acquired simultaneously (5-wire ECG cable)
- ECG Size: 4, 3, 2.5, 2, 1.5, 1, 0.5, 0.25 cm/mV
- Heart Rate Display: 20 - 300 bpm
- Continuous Patient Surveillance System (CPSS): In advisory mode while Shock Advisory System™ is not active, CPSS monitors the patient, via paddles or Lead II ECG, for potentially shockable rhythms
- Voice Prompts: Used for selected warnings and alarms. Can be configured On/Off.
- Uses MASIMO SET sensors with additional configuration available for compatibility with select Nellcor sensors
- Saturation Range: 1 - 100%
- Saturation Accuracy: (70–100%) (0–69% unspecified)
- Pulse Rate Range: 25-240 pulses per minute
- Diagnostic: 0.05 to 150Hz or 0.05 to 40Hz (user configurable)
- Monitor: 0.67 to 40Hz or 1 to 30Hz (user configurable)
- Paddles: 2.5-30 Hz
- Analog ECG Output: 0.67 to 32Hz (except 2.5 to 30Hz for Paddles ECG)
- Pacing Mode: Demand or non-demand rate and current defaults (user configurable)
- Pacing Rate: 40-170 ppm
- Rate Accuracy: +/- 1.5% over entire range
- Output Waveform: Monophasic, amplitude stable to +/- 5% relative to leading edge for currents greater than or equal to 40 mA, Duration 20 +/- 1 ms, Rise/Fall times <= 1 ms [10–90% levels]
- Output Current: 0-200 mA
- Pause: Pacing pulse frequency reduced by a factor of 4 when activated.
- Refractory Period: 200 to 300 ms +/-3% (function of rate)
- AC Powered: 90–132 VAC 50/60Hz, 198–264 VAC 50/60 Hz, total power draw less than 120 Volt-Amperes (VA
- Internal Battery Backup: Lithium-ion rechargeable battery charges while device operates from AC power.
- Operating Time: A new, fully charged internal backup battery will provide the following before shutdown:
• Monitoring plus SpO2 (minutes): 210 Total/5 After Low Battery Alert
• Monitoring, plus pacing (at 100 ma, 60 ppm), plus SpO2 (minutes): 110 Total/2 After Low Battery Alert
• Defibrillation (360 J discharges): 140 Total/3 After Low Battery Alert
- Battery Charge Time: <4 hours when device is powered off and plugged in to AC power.
- Low Battery Alert and Message: When the device is unplugged from AC power, it switches to battery. When the battery gets low, the battery status indicator displays one yellow segment and a “low battery” message and warning tone occurs. Shortly thereafter the status indicator displays one flashing red segment, the “low battery; connect to AC power” message appears, and a warning tone occurs.
- Service Indicator: LED illuminates when service is required.
- Operating Temperature: 5˚ to 40˚C (41˚ to 104˚F) SpO2: 5˚ to 45˚C (41˚ to 113˚F)
- Non-Operating Temperature: -20˚ to +60˚C (-4˚ to 140˚F) except therapy electrodes and batteries
- Relative Humidity (Operating): 5 to 95%, non-condensing
- Atmospheric Pressure (Operating): Ambient to 522 mmHg (0 to 3048 m) (0 to 10,000 ft)
MANUAL DEFIBRILLATION MODE
AED DEFIBRILLATION MODE:
DATA MANAGEMENT AND COMMUNICATIONS